Posted by bill hooks on August 17, 1999 at 18:25:34:
In Reply to: Re: fuel/air & slide on mufflers (aka) supertrapp posted by Ken Linczer on August 16, 1999 at 15:22:56:
Any mechanic can assist you on how to shim the needle. The only thing is is you have to be
careful alot of people want to help but you must
first know what your talking about. I would only
suggest go with supertrapp no tampering with
the carb. do not try to run to many disc
and for the sake of your engine do not try running the supertrapp gutted. you might want
to have the needle shimmed this will compensate
from having to rejet which to my knowledge they
do not make a dynojet kit anyhow. Dont know about the spacer my spacer is still in place kinda enjoy the unburnt fuel fart. All they do is put
2 bolts under the needle if you change the needle
you will have to change other things as well
for compensation air /fuel.(not advised unless
you are a skilled mech. enjoy and good luck
bill newport news va. currently in nc.